Showing posts with label Firmware for TP-LINK TL-WR802N. Show all posts
Showing posts with label Firmware for TP-LINK TL-WR802N. Show all posts

TP-Link TL-WR802N

TP-Link TL-WR802N

Anyone on the forum have experience with the TP-Link TL-WR802N? Specifically has anyone tried running third party firmware on it? It looks like it is similar to the TL-WR841ND v9 and can unofficially run the firmware intended for the TL-WR841ND v9. Anyone try and have any experience with it? I got one as a gift and its a cool little unit for travel, I'd just like to give it some more capabilities...

TP-Link TL-WR802N - double speed to classical TL-WR702N

TP-Link TL-WR802N - double speed to classical TL-WR702N

Modifications and Bug Fixes:

New Features/Enhancement:
1.Enhanced support for defending XSS attack;
2.optimize usability of the WEB UI.

Notes:
1.For TL-WR802N 1.0
2.The configuration will be lost after upgrading.To avoid this issue please backup the configuration before upgrading,then restore the router by this configuration file.

TP-LINK TL-WR802N legacy-firmware

TP-LINK TL-WR802N
Factory Default Firmware

Default settings of the TP-LINK TL-WR802N

o reset the TP-LINK TL-WR802N to its default settings, you have to do the following steps:
Put router into operation.
For at least 5 seconds, press the Reset button.
Device restarts automatically.
Restoration of standard settings is finished.

Default settings of the TP-LINK TL-WR802N

the development of OpenWRT TL-WR802N

I resubmitted the patch for this device because a lot of people asked for it. But it looks like the development of OpenWRT is stalled for some time - so I'll leave the firmware binaries here until it has been integrated. 

There's an image with and one without LuCI in case you need more space for additional packages. 

This is the current trunk (Designated Driver) from 04-04-2016. It's not completely tested so your device might catch fire.

TP-Link TL-WR802N 1.0

TP-Link TL-WR802N 1.0

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

DD-WRT install on TP-LINK TL-WR802N

DD-WRT install on TP-LINK TL-WR802N

Turns out you can run DD-WRT on the TP-LINK TL-WR802N

To install you need to use TFTP, 
set set your PC IP to 192.168.0.66, 
change the filename of the firmware you are uploading to "wr802nv1_tp_recovery.bin", 
and then hold the reset button on the router for 3 seconds while plugging it in. 

GL-AR150 - GLI Mini Travel Router

GLI Mini Travel Router GL-AR150 with 2dbi external antenna, WiFi Converter, OpenWrt Pre-installed, Repeater Bridge, 150Mbps High Performance, OpenVPN, Tor Compatible, Programmable IoT Gateway

by GLI
CDN$ 66.69

other recomendations


TP-LINK TL-WR802N V4

I’m trying to “add support” (well, see if it’s possible in the first place) for lede/openwrt and the tp link tl-wr802N v4.
According to https://wikidevi.com/wiki/TP-LINK_TL-WR802N_v4.x, the SoC is a MediaTek MT7628N, also used in TL-WR840N v4 for example, so that should be supported.
So, I opened up a tl-wr802n v4 and start searching for serial pins (usually, those are named TP_IN, TP_OUT, I read).
I found none.
So, what would be the next step to try to have lede running on these devices?
I took many photos of the board, if someone see something i missed…
Thanks,


300Mbps Wireless N Nano Router
TL-WR802N
300Mbps wireless data rates is ideal for video streaming, online gaming and Internet calling
Pocket-size – Ideal for home and travel use
Supports Router, Repeater, Client, AP and hotspot operation modes
Powered through a micro USB port by an external power adapter or USB connection to a computer provides flexibility for any situation
Easy installation in minutes



DD-WRT install on TP-LINK TL-WR802N

DD-WRT install on TP-LINK TL-WR802N


According to this ticket for openwrt, it's the same chipset as TL-WR841N(D) v9 which is supported.

TP-Link TL-WR802N

TP-Link TL-WR802N

Anyone on the forum have experience with the TP-Link TL-WR802N? Specifically has anyone tried running third party firmware on it? It looks like it is similar to the TL-WR841ND v9 and can unofficially run the firmware intended for the TL-WR841ND v9. Anyone try and have any experience with it? I got one as a gift and its a cool little unit for travel, I'd just like to give it some more capabilities...

For reference I've found these:
DD-WRT: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=997566
OpenWRT: https://dev.openwrt.org/ticket/19232

TP-LINK TL-WR802N openwrt

Did anyone try to flash from the TP-Link GUI directly, or via TFTP? If via the GUI it might be the filename that is causing the problem. In the installation link you posted there is this note that the TL-WR841N firmware does not accept the OpenWRT filename. Maybe the TL-WR802 firmware is doing the same thing?

":!: Note: Newest version of tp link firmware (tested on TL-WR841N_V9_150310 / 3.16.9) does not accept openwrt firmware filename,

so you have to rename the downloaded openwrt firmware to something what looks

like stock firmware prior flashing,

i.e. wr841nv9_wr841ndv9_en_3_16_9_up(150310).bin

for V9 - check the zip with original firmware on tp link website for correct file name scheme - I'd suggest to remove "boot" word from filename, because openwrt firmware does not contain boot loader."

Search · WR802N · GitHub

Search · WR802N · GitHub

RickP/OpenWRT-for-WR802N
OpenWRT Designated Driver (04-04-2016) for the TP-Link WR802N
https://github.com/RickP/OpenWRT-for-WR802N

TL-WR802N V3 (EU) FIRMWARE
iAbadia/TL-WR802NV3
https://github.com/iAbadia/TL-WR802NV3

Docker image for compiling TL-WR802NV3 (EU) firmware
iAbadia/docker_TL-WR802NV3
https://github.com/iAbadia/docker_TL-WR802NV3


TP-LINK TL-WR802N Default Username Password

Default settings of the TP-LINK TL-WR802N

Here you can find the default IP address and the username and password for the user interface of the TP-LINK TL-WR802N 300Mbps Wireless N Nano router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

TP-LINK TL-WR802N Default Username Password

TP-Link TL-WR802N

the issue with that little router is it also has a quite small amount of ram and flash ram
https://wikidevi.com/wiki/TP-LINK_TL-WR802N_v1.0

now dont confuse the
TP-Link TL-WR802N

which is a small travel router
http://www.tp-link.com/en/products/details/cat-9_TL-WR802N.html

Bricked TP-Link WR841N/ND Recovery Unbrick Without A Serial Connection

DD-WRT install on TP-LINK TL-WR802N


No guarantees as I am a noob. But I think that I came across a solution for you in the process of bricking and unbricking WR802Nv1.

1. Follow youtube video:    Bricked TP-Link WR841N/ND Recovery Unbrick
2. Download Firmware version: http://www.tp-link.us/res/down/soft/TL-WR802N_V1_150717.zip (Other firmware versions have the upgrade error that you mentioned)
3. As in video use IP 192.168.0.66 to TFTP.
4. Rename the firmware to "wr802nv1_tp_recovery.bin"
5. Plug the router into the ethernet and push in reset button for 3-4 seconds. (Make sure firewalls and antivirus turned off)

This is my one and only idea. I hope it helps. If not, I am out of ideas. 


Bricked TP-Link WR841N/ND Recovery Unbrick Without A Serial Connection


Bricked TP-Link WR841N/ND Recovery Unbrick Without A Serial Connection
https://www.youtube.com/watch?v=0k1sxwX5pMk