Showing posts with label DD-WRT install on TP-LINK TL-WR802N. Show all posts
Showing posts with label DD-WRT install on TP-LINK TL-WR802N. Show all posts

TP-Link TL-WR802N

TP-Link TL-WR802N

Anyone on the forum have experience with the TP-Link TL-WR802N? Specifically has anyone tried running third party firmware on it? It looks like it is similar to the TL-WR841ND v9 and can unofficially run the firmware intended for the TL-WR841ND v9. Anyone try and have any experience with it? I got one as a gift and its a cool little unit for travel, I'd just like to give it some more capabilities...

Default settings of the TP-LINK TL-WR802N

o reset the TP-LINK TL-WR802N to its default settings, you have to do the following steps:
Put router into operation.
For at least 5 seconds, press the Reset button.
Device restarts automatically.
Restoration of standard settings is finished.

Default settings of the TP-LINK TL-WR802N

TP-Link TL-WR802N 1.0

TP-Link TL-WR802N 1.0

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

DD-WRT install on TP-LINK TL-WR802N

DD-WRT install on TP-LINK TL-WR802N

Turns out you can run DD-WRT on the TP-LINK TL-WR802N

To install you need to use TFTP, 
set set your PC IP to 192.168.0.66, 
change the filename of the firmware you are uploading to "wr802nv1_tp_recovery.bin", 
and then hold the reset button on the router for 3 seconds while plugging it in. 

GL-AR150 - GLI Mini Travel Router

GLI Mini Travel Router GL-AR150 with 2dbi external antenna, WiFi Converter, OpenWrt Pre-installed, Repeater Bridge, 150Mbps High Performance, OpenVPN, Tor Compatible, Programmable IoT Gateway

by GLI
CDN$ 66.69

other recomendations


DD-WRT install on TP-LINK TL-WR802N

DD-WRT install on TP-LINK TL-WR802N


According to this ticket for openwrt, it's the same chipset as TL-WR841N(D) v9 which is supported.

TP-Link TL-WR802N

TP-Link TL-WR802N

Anyone on the forum have experience with the TP-Link TL-WR802N? Specifically has anyone tried running third party firmware on it? It looks like it is similar to the TL-WR841ND v9 and can unofficially run the firmware intended for the TL-WR841ND v9. Anyone try and have any experience with it? I got one as a gift and its a cool little unit for travel, I'd just like to give it some more capabilities...

For reference I've found these:
DD-WRT: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=997566
OpenWRT: https://dev.openwrt.org/ticket/19232

TP-LINK TL-WR802N openwrt

Did anyone try to flash from the TP-Link GUI directly, or via TFTP? If via the GUI it might be the filename that is causing the problem. In the installation link you posted there is this note that the TL-WR841N firmware does not accept the OpenWRT filename. Maybe the TL-WR802 firmware is doing the same thing?

":!: Note: Newest version of tp link firmware (tested on TL-WR841N_V9_150310 / 3.16.9) does not accept openwrt firmware filename,

so you have to rename the downloaded openwrt firmware to something what looks

like stock firmware prior flashing,

i.e. wr841nv9_wr841ndv9_en_3_16_9_up(150310).bin

for V9 - check the zip with original firmware on tp link website for correct file name scheme - I'd suggest to remove "boot" word from filename, because openwrt firmware does not contain boot loader."

TP-Link TL-WR802N

the issue with that little router is it also has a quite small amount of ram and flash ram
https://wikidevi.com/wiki/TP-LINK_TL-WR802N_v1.0

now dont confuse the
TP-Link TL-WR802N

which is a small travel router
http://www.tp-link.com/en/products/details/cat-9_TL-WR802N.html

Bricked TP-Link WR841N/ND Recovery Unbrick Without A Serial Connection

DD-WRT install on TP-LINK TL-WR802N


No guarantees as I am a noob. But I think that I came across a solution for you in the process of bricking and unbricking WR802Nv1.

1. Follow youtube video:    Bricked TP-Link WR841N/ND Recovery Unbrick
2. Download Firmware version: http://www.tp-link.us/res/down/soft/TL-WR802N_V1_150717.zip (Other firmware versions have the upgrade error that you mentioned)
3. As in video use IP 192.168.0.66 to TFTP.
4. Rename the firmware to "wr802nv1_tp_recovery.bin"
5. Plug the router into the ethernet and push in reset button for 3-4 seconds. (Make sure firewalls and antivirus turned off)

This is my one and only idea. I hope it helps. If not, I am out of ideas. 


Bricked TP-Link WR841N/ND Recovery Unbrick Without A Serial Connection


Bricked TP-Link WR841N/ND Recovery Unbrick Without A Serial Connection
https://www.youtube.com/watch?v=0k1sxwX5pMk